Datacryptor Ethernet User Manual
Element Manager Reference
1270A450-005 - June 2008
Page 41
•
Beneath the front panel diagram are five large buttons that provide direct access to
management facilities (see the
Front Panel Viewer buttons
section below).
Note:
Pressing F5 while using the Front Panel Viewer will cause a refresh of all
displayed settings from the unit.
User Key Material
Adminv2.usr
User key material (containing public and secret keys of user)
protected by a default password of:
PASSWORD
Adminv3.usr
Alternative user key material (containing public and secret keys of
user) protected by a default password of:
11aaBB!!PASS
The Front Panel LEDs
The Front Panel LEDs indicate the state of the unit.
Indicator Light
State
Indication
On
Unit is powered on
Power (green)
Off No
power
On Normal
operation
Fast Flash
Link Down
Slow Flash
Not used
Network (green)
Off
Loss of Signal, Loss of Synchronization
On
Errors have occurred
Fast Flash
New errors in log
Error (red)
Off No
errors
Off 100
Mbps
operation
10M (100 Mb
Ethernet unit only)
On 10
Mbps
operation
Off
Normal operation - no loopback enabled
Slow flash
Host loopback enabled
Fast Flash
Network loopback enabled
Loopback (yellow)
(1 Gig and 10 Gig
Ethernet units only)
On
Host and Network loopback enabled
On
Unit is alarmed - Hardware fault
Fast flash
Unit is not commissioned
Alarm (red)
Off
No Alarm
On
Unit is in Encrypt mode
Slow flash
Standby
Encrypt (green)
Off
Unit is not in Encrypt mode
Fast Flash
Unit is in Plain mode
Plain (red)
Off
Passthrough mode not selected
Host (green)
On
Normal operation
All manuals and user guides at all-guides.com
all-guides.com
