Thales Datacryptor Ethernet User Manual Download Page 59

Page: 59 / 134

Datacryptor Ethernet User Manual

Element Manager Reference

1270A450-005 - June 2008

Page 59

The Diagnostics Tab

The

Diagnostics

tab will provide a range of diagnostic aids.

Currently, it provides two diagnostic facilities:

Reboot:

click this button to reboot the unit as if it had been turned off and on again. (This

operation takes several minutes)

Rebooting halts all operations on the device and starts the boot process in the same manner as
when the power is cycled. Save any configuration changes prior to rebooting the unit. Unsaved
changes will be lost.

All manuals and user guides at all-guides.com

Summary of Contents for Datacryptor Ethernet







































































































































Search results

Summary of Contents for Datacryptor Ethernet

Reviews:

Related manuals for Datacryptor Ethernet

Brands by name

Popular brands

Thales Datacryptor Ethernet, User Manual

Search results

Summary of Contents for Datacryptor Ethernet

Reviews:

Related manuals for Datacryptor Ethernet

Brands by name

Popular brands