Thales Datacryptor Ethernet User Manual Download Page 35

Page: 35 / 134

Datacryptor Ethernet User Manual

Element Manager Reference

1270A450-005 - June 2008

Page 35

Main Window Pull-down Menus

The pull-down menus are: File, Edit, View, Tools and Help.

File

The following options are available from the

File

pull-down menu:

Menu Option

Description

New Unit

Add a new Datacryptor unit to the window.

Delete Unit

Delete the selected Datacryptor unit from the window.

Exit

Terminate the application, closing all sessions that may be open.

Edit

The following options are available from the

Edit

pull-down menu:

Menu Option

Description

Undo Delete

Restore the last Datacryptor unit deleted.

Edit Unit

Edit the selected unit's description, IP address or connection
method.

View

The following options are available from the

View

pull-down menu:

Menu Option

Description

Toolbar

A toggle controlling the display of the Toolbar and its buttons. Ticked
when enabled.

Status bar

A toggle controlling the display of the Status bar, which is used for
context-sensitive message and help. Ticked when enabled.

Large icons
Small icons
List
Details

The four different ways that Datacryptor details can be shown, in the
main window. The currently selected method has a bullet next to it.

Refresh

Redraw the window, updating all details.

All manuals and user guides at all-guides.com

Summary of Contents for Datacryptor Ethernet







































































































































Search results

Summary of Contents for Datacryptor Ethernet

Reviews:

Related manuals for Datacryptor Ethernet

Brands by name

Popular brands

Thales Datacryptor Ethernet, User Manual

Search results

Summary of Contents for Datacryptor Ethernet

Reviews:

Related manuals for Datacryptor Ethernet

Brands by name

Popular brands