manualshive.com logo in svg

Thales CGRS, User Manual, Page: 137 / 160

Share
Download
Thales CGRS User Manual Download Page 137

Screen Descriptions

 

123

Sc

re

en Des

cri
pti
ons

File Manager Screen

The 

File Manager

 screen, Figure 4.16,  lets you examine details of each data file stored in the 

receiver and delete data files that are no longer needed.  Each data file is tagged with an 
identifier indicating if the file has been downloaded; this is very useful when deciding which 
files to delete when additional memory is required. The 

File Manager

 screen is accessed by 

selecting 

File Manager

 in the 

Survey Menu

.  Table 4.13 describes the screen parameters.   

The file naming convention for survey data files is shown in Figure 4.17.  

       

   

 Figure 4.16   

File Manager Screen

 Table 4.13  

File Manager Screen Parameters

Parameter

Description

R1234...... etc.

A list of the raw data files stored in the ProMark2 GPS receiver. Up to 100 files can be 
stored in the receiver at one time.  Files are automatically closed when the receiver is 
turned off.  Each file has a symbol associated with it with the following meanings:

> Indicates that this file is the current file into which data is being recorded
+ Indicates that the file has not yet been downloaded from the receiver
- Indicates that the file has been downloaded from the receiver.

Detail Map

A detailed map uploaded into the receiver’s memory.  If more than one map is uploaded, 
the Detail Map parameter will include information of all maps uploaded.  Detail maps 
are provided on the MapSend Streets CD. 

Delete

Deletes the highlighted file. 

Del All

Deletes all files, except any uploaded map. 

Arrow button

To delete a particular  file, use the up/down arrows on the arrow button to highlight the 
file. The selected file appears in the lower pane of the display. Now, if necessary,  use the 
left/right arrows on the arrow button to highlight 

Delete

. Press 

ENTER

 to delete the file. 

Upper pane

Lower pane

Summary of Contents for CGRS

































































































































































Reviews:

No comments