manualshive.com logo in svg

Thales CGRS, User Manual, Page: 119 / 160

Share
Download
Thales CGRS User Manual Download Page 119

Surveying with ProMark2

 

105

Surveyi

ng

 with Pr

oMark2

the 

Survey Status

 screen, Figure 3.68.   

The 

Survey Status

 screen provides information on the status of our survey during the 

data collection period.  From this screen, monitor the following observation quality 
indicators:
•

Elapsed

 - The Elapsed field displays the amount of time passed since the data 

collection session started.

Note:  The Remain time counter is displayed in Kinematic mode only during 
a point initialization.  Otherwise the Elapsed time counter is displayed.

•

# Sats

 - The

 #Sats

 field displays the current number of healthy satellites above a 

10

°

 elevation being logged into memory.  Periods of low satellite number will 

require more data to be collected for a successful observation.  This can be a good 
indicator of the effect of obstructions at the survey site at any given time during 
data collection. 

•

PDOP - 

The 

PDOP

 field displays the PDOP value at any given time, computed 

from all observed healthy satellites above a 10

°

 elevation.  Periods of high PDOP 

will require more data to be collected for a successful observation.  This can be a 
good indicator of the effect of obstructions at the survey site at any given time 
during data collection. 

In addition to the survey status information, the 

Survey Status

 screen also presents 

the same power and memory status displays found on the 

Satellite Status

 screen.

15.

Start

 is highlighted and the receiver is ready to collect data.  Press the 

ENTER

 

button to start the data collection session.  The 

Elapsed

 field will begin to count up.

 Figure 3.68  

Survey Status – Kinematic Screen

Summary of Contents for CGRS

































































































































































Reviews:

No comments