manualshive.com logo in svg

Thales CGRS, User Manual, Page: 126 / 160

Share
Download
Thales CGRS User Manual Download Page 126

112

ProMark2 User’s Guide

Point Attribute - Static Screen 

The 

Point Attribute 

screen lets you enter and store attribute information of the point at which 

data is being or will be collected.  The entered attribute information is stored along with the 
raw survey data and downloaded for use during data processing.  The 

Point Attribute

 screen 

is accessed by selecting 

Point Attribute

 in the 

Survey Menu

.   There are three 

Point 

Attribute

 screens, one for each of the three survey modes available through the 

Survey Mode

 

screen. The 

Point Attribute - Static

 screen, Figure 4.7, lets you enter and save site ID and site 

description information when in 

Static

 mode. Table 4.4 describes the screen parameters.          

 Figure 4.7   

Point Attribute - Static Screen

 Table 4.4   

Point Attribute - Static Screen Parameters

Parameter

Description

Site ID

Lets you enter a 4-character alphanumeric site ID. If fewer than 4 characters are entered, the 
empty fields will be automatically filled with - (dashes).  Valid characters are all characters 
except for
                                ?   space   <    >   :   \
If an illegal characters is entered, it will automatically be replaced by - (dash).  Default is ????.

Site Description

Calls the Site Description screen where you can select a descriptor from the descriptor list, enter 
a new descriptor of up to 20 characters, edit a descriptor, and delete a descriptor. Default entry 
is blank.

Save

Saves settings. 

Summary of Contents for CGRS

































































































































































Reviews:

No comments