manualshive.com logo in svg

Thales CGRS, User Manual, Page: 133 / 160

Share
Download
Thales CGRS User Manual Download Page 133

Screen Descriptions

 

119

Sc

re

en Des

cri
pti
ons

Init Mode Screen

The 

Init Mode

 screen, Figure 4.12, is accessed from the 

Point Attribute

 screen when the 

Initialize field is highlighted and the 

Enter

 key is pressed.

The 

Init Mode

 screen lets you select a type of point initialization.  The options include 

<None>

, 

Bar

, and 

Known

.  Table 4.9 describes the screen parameters.        

 Figure 4.12   

Init Mode Screen

 Table 4.9   

Init Mode Screen Parameters

Parameter

Description

<None>

Sets the initialization tag for the point occupation to none.  The point will not be listed 
as an initialization point.

Bar

Sets the initialization tag for the point occupation to kinematic bar.  The post 
processing software will detect the point as an initialization point.

Known

Sets the initialization tag for the point occupation to known point.  The post processing 
software will detect the point as an initialization point.  

Bar

 and 

Known

 are available 

during a stop-and-go and kinematic data collection mode.  

Known

 is available after a 

point has been tagged as 

Control Point

 and logged in stop-and-go mode of operation.

If returning to a known point that has not previously been set as a control point, simply 
use the same site ID and set it as a control point when the re-occupation takes place. 

Save

Saves settings.

Note: Known is not available unless at least one point has been tagged as Control and logged.  Also, Known 
is not available if all site IDs from the Known point table are deleted.

Summary of Contents for CGRS

































































































































































Reviews:

No comments