manualshive.com logo in svg

Thales CGRS, User Manual, Page: 123 / 160

Share
Download
Thales CGRS User Manual Download Page 123

Screen Descriptions

 

109

Sc

re

en Des

cri
pti
ons

Survey Screen

The 

Survey

 screen, Figure 4.4, provides the option to begin data collection or to access the 

survey menu in order to set up receiver and data collection parameters without going into data 
collection mode.  The ability to access the survey menu from this point is useful when you 
wish to set up the receiver or manage receiver data files while not collecting data, i.e. in an 
office environment.  You can also enter point attribute information for the point you are about 
to survey prior to beginning data collection, but this is not required since point attribute 
information can be entered at any time during the data collection process.  The 

Survey

 screen 

is accessed by selecting 

Survey

 from the 

Mode

 screen.  Table 4.1 describes the survey screen 

selections.   

 

  

    

 Figure 4.4   

Survey Screen

 Table 4.1  

Survey Screen Selections

Selection

Description

Setup

Calls the 

Survey Menu

, page 110.

Collect Data

Calls the 

Satellite Status

 screen, page 134, or displays an alarm if there is 

no external antenna connected. 

Summary of Contents for CGRS

































































































































































Reviews:

No comments