3. Terminal strips on the detector board
4. Clamp on the back of the body
Maintenance
Clean the detector body from dust, cobwebs, and other contaminants as they emerge. Use a
soft dry cloth that is suitable for equipment care.
Do not use substances that contain alcohol, acetone, gasoline or other active solvents to clean
the detector. Carefully wipe the lens
— scratches on the plastic can reduce the detector
sensitivity.
The battery installed in the detector provides up to 5 years of autonomous operation (at a hub
polling rate of 3 minutes). When the detector battery is discharged, the security system will send
the appropriate notification, and the LED will smoothly light up and go out when the detector
detects a movement or tamper is triggered.
The detector has a built-in battery charge control system. As soon as the bundled batteries
need to be replaced, you will receive an appropriate notification.
Tech Specs
Sensing element
PIR sensor, 2 pcs
Detection angle, horizontal
90°
Motion detection distance
Adjustable, 3–15 m when the detector is
installed at 1 m height
