Maintenance and
Disassembly
Page 43
3.
Electrical parts
Note: Remove the air outlet grille(refer to 1. Panel plate) before disassembling electrical parts.
MRFOT12DS
;
MRFOT18DS
Procedure
Illustration
1) Remove the two screws fixed the
electronic control board (see CJ_
ODU_007).
2) Disconnect the wires connected to
the compressor. (Black wire connects
with terminal 1,blue wire and red
wire connect with the compressor
capacitor) (see CJ_ODU_007)
3) Disconnect the wires connected to
4-way valve.(Blue wires on terminal
2&3) (see CJ_ODU_007)
4) Remove the electrical parts (see CJ_
ODU_007).
5) Remove the fixing screw of the
compressor capacitor, then pull it out
(see CJ_ODU_007).
6) Disconnect the wires connected to
the fan motor (see CJ_ODU_007).
CJ_ODU_007
Note: This section is for reference only. Actual unit appearance may vary.
2) Two Fixing Screws
3) Wires Of Compressor
Terminal 1 to 4
