Pagina 9 di 35
AD1100TE-STD.EN-00 - Subject to change without notice
TFT DryAir
Reactivation air heater coil
The electric heaters reactivation is of the type with steel elements, with double safety protection for
high temperature, eliminating the risk of overheating and allows a control steps for a power
modulation from 0%, 50% and 100% of the yield of dehumidifier.
Electrical panel
The electrical panel is located inside the unit. Switches and indicators of operation are located outside
the dehumidifier.
Possibility of operation
The mode selector on the outside of the dehumidifier allows the following modes:
0
dehumidifier stopped (in case of alarm, this position works by Reset)
MAN
dehumidifier in operation continuously (power 100%)
AUTO
dehumidifier controller by a humidistat or by an external signal
After the dehumidifier has been switched off, wait at least for 15 minutes before going inside
in order to allow the dehumidifier to cool.
