Pagina 30 di 35
AD1100TE-STD.EN-00 - Subject to change without notice
TFT DryAir
Menu
Parameter
Description
Unit of
measurement
Default
Value
Set
Value
CF14
Setting output proportional control reactivation, for mixed management
Steam/Water + Electric (With CF02> 7):
OFF = Output reactivation of output Post-cool it / Post-heating
On = Output reactivation of output pre-cool it / Pre-heating
OFF/On
OFF
CF15
Operating settings General alarm unit:
OFF = The unit continues to operate while keeping the process air control also in
case of fault in the management of the regeneration and signal the general alarm
On = The unit stops completely to every anomaly and this signals the general alarm
Software Version 1.5.0 (FW 412.20)
(*) In order for the change to take effect you need to boot the instrument, remove power, wait a few seconds and turn it.
