TFortis PSW-2G4F, Configuration Manual

Page: 83 / 115


vlan – information about configured VLANs

sntp — information about SNTP

smtp — information about SMTP

firmware — information about current firmware version

packet — statistics on the transmitted / received packets on the port

fdb — switching table

arpentry — ARP table of the switch

autorestart — information about Autorestart function

comfortstart — information about Comfortstart function

dry_cont – information about the state of dry contacts

tftp — information about TFTP

events – information about configured events

802.1p — information about basic QoS settings

scheduling_mechanism — scheduling mode in QoS

dscp_mapping — distribution of DSCP labels by queues in QoS

bandwidth_control – information about limitation of speed on the port

poe – information about PoE

config – displays the entire switch configuration

mac_filtering – information about MAC address filtering

inputs – information about the inputs of the expansion board

outputs – information about the outputs of the expansion board

rs485 – RS485 configuration information

aggregation – information about setting up aggregated channels

mirroring – information about configuring port mirroring

teleport – information about setting up the broadcast to Teleport integration
units
3. Firmware upgrade and configuration download from TFTP server
download
4. Save settings and system log to TFTP server
upload
5. Ping utility
ping
6. Virtual Cable testing utility (Cable tester)
cable_diag
7. Save and apply settings
save
8. Reboot
reboot