3 Light indication
TFortis PSW switches have 2 LED indicators to show the operating mode of
the switch processor:
DEFAULT
and
CPU
. (Figure 1.1, Table 1.1) (Descriptions and
functions of other light indicators are available in Operating Manual, Section 2.7,
Configuration and control elements)
.
Figure 1.1 DEFAULT and CPU indicators – PSW switch
Figure 1.2 DEFAULT and CPU indicators – SWU switch
Table 1.1 Purpose of indicators
Indicator status
Device status
CPU
indicator flashing
slowly (at 1 Hz)
Normal operation
DEFAULT
indicator on
The device is not configured, with factory-default
settings.
CPU
indicator flashing
rapidly (at 10 Hz)
Indication of camera hanging (or there is no link on the
video camera port or the camera does not respond to
Ping), or indication of dry contacts active status.
CPU
and
Default
indicators flashing in sync
Hardware or software fault is detected. Contact
technical support.
