15
14
Radio-controlled clock with indoor climate
Radio-controlled clock with indoor climate
13. Specifications
Power consumption
2 x AA 1,5 V batteries (not included)
Measuring range - temperature -10 °C… 50 °C /14 °F…122 °F
Resolution
0,1 °C ( 0,1 °F)
Indication: LL / HH
Temperature is outside measuring range
Measuring range - humidity
20 %...95 %
Resolution
1 %
Display 19 / 96 %
Humidity is outside measuring range
Housing dimension
206 x 30 (59) x 130 mm
Weight
287 g (device only)
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the
time of going to print and may change without prior notice.
The latest technical data and information about this product can be found in our homepage by simply entering the product
number in the search box.
EU Declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 60.2557 is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following Internet address:
www.tfa-dostmann.de
E-Mail: [email protected]
TFA Dostmann GmbH & Co.KG
Zum Ottersberg 12, D-97877 Wertheim, Germany
05/19
8. Backlight
• Press the
sensor button.
• The backlight turns on for 8 seconds.
9. Mounting
• With the suspension device you can fix the device with a nail or a solid screw and dowel on a wall. For
table standing please fold out both holders.
10. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if the device will not be used for an extended period of time.
• Keep the device in a dry place.
10.1 Battery replacement
• Change the batteries when the battery symbol
appears on the display.
• Open the battery compartment and insert two new AA 1.5 V batteries, polarity as illustrated.
• Close the battery compartment again.
11. Troubleshooting
Problem
Solution
No display on the device
➜
Ensure the batteries' polarities are correct
➜
Change the batteries
No DCF reception
➜
Press the
button briefly to activate the reception
➜
Press and hold the
button to activate the DCF reception in setting
mode (RCC ON)
➜
Wait for an attempt reception during the night
➜
Choose another place for your product
➜
Set the clock manually
➜
Check if there is any source of interference.
➜
Restart the instrument according to the manual
Incorrect indication
➜
Change the batteries
If your device fails to work despite these measures, contact the retailer where you purchased the product.
12. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled
and reused.
Never dispose of empty batteries and rechargeable batteries with ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate
collection site depending on national or local regulations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment
Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are
required to take end-of-life devices to a designated collection point for the disposal of electri-
cal and electronic equipment, in order to ensure environmentally-compatible disposal.
TFA_No. 60.2557_Anleitung 02.05.2019 18:09 Uhr Seite 8