TFA 42.6003, Instruction Manual, Page: 7 / 22

13 12
WIND BEE – Anemometer
8. Troubleshooting
Problems Solution
No display
➜
Press the ON/OFF button
to turn on the device
➜
Ensure that the battery
polarity is correct
➜
Change the battery
Incorrect indication
➜
Change the battery
If your device fails to work despite these measures contact
the supplier from whom you purchased it.
9. Waste disposal
This product and its packaging have been manufactured
using high-grade materials and components which can be
recycled and reused. This reduces waste and protects the
environment.
Dispose of the packaging in an environmentally friendly man-
ner using the collection systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and
rechargeable batteries from the device and dis-
pose of them separately.
This product is labelled in accordance with the
EU Waste Electrical and Electronic Equipment
Directive (WEEE).
This product must not be disposed of in ordinary
household waste. As a consumer, you are
required to take end-of-life devices to a designat-
ed collection point for the disposal of electrical
and electronic equipment, in order to ensure
environmentally-compatible disposal. Observe
the current regulations in place!
WIND BEE – Anemometer
• Press the MAX/MIN button again to leave the maximum
and minimum mode
6.4 Changing of the temperature unit
• The default setting is °C.
• To change the temperature unit, turn off the device first by
pressing and holding the ON / OFF button.
• Press and hold the MAX/MIN button.
• Press and hold the ON/OFF button at the same time.
• The device switches on and the temperature unit appears
in °F.
• To change the temperature unit again, turn off the device
first.
6.5 Backlight
• Press the ON/OFF button to activate or deactivate the
backlight.
• If the ON/OFF button is not pressed, the backlight switch-
es off automatically after approximately 30 seconds.
7. Care and maintenance
• Clean the device with a soft damp cloth. Do not use sol-
vents or scouring agents.
• Remove the battery if you do not use the device for a long
period of time.
• Keep the device in a dry place.
7.1 Battery replacement
• Change the battery when the battery symbol
appears on the display.
• Confirm the device is power off before changing battery.
• Open the battery compartment and insert a new battery
9 V.
TFA_No. 42.6003 Anleitung_11_21 22.11.2021 11:55 Uhr Seite 7