6. Working
41
6.5.7.
Sonar MCK Electrical Distributor
6.5.7.1.
Control Basics
A ON-OFF general button with green led
B Left “AUTO/MAN” button with green led
C “POWER TENSION” green led
D Left “START/STOP” button with red led
E General “START/STOP” button with red led
F “SELECT / RESET” button for display and reset indications
G General “AUTO/MAN” button with green led
H “PROG” button for constant programming
I
Right “START/STOP” button with red led
L “–” button to diminish values in programming phase
M “+” button to increase values in programming phase
N Right “AUTO/MAN” button with green led
O 5 numbers back-lit LCD display with green leds to view
6.5.7.2.
Pressure Adjustment
1.
Switch on the control, tapping the ON button (A position).
2.
Set the control on hand-operating mode (tap B and N buttons, if it
is convenient, switching off thus the green leds).
3.
Close the electrovalves of the sectors (tap D and I buttons, it it is
convenient, switching on the red colour leds).
4.
Connect the PTO and make it spin to the planned working
revolutions.
5.
Open the electrovalves of the sectors (tap D and I switching off
the colour red leds).
6.Turn the pressure knob of the distributor to the wanted pressure,
Clockwise turn stands for increasing pressure, counterclockwise for
diminishing pressure.
