SECTION 3
CESSNA
ABNORMAL PROCEDURES
MODEL 208B 867 SHP
GARMIN G1000
U.S.
FAA APPROVED
AVIONICS/AUTOPILOT
(Continued)
DISPLAY UNIT FAILURE
This is indicated by a complete loss of image on a display. If only
individual elements of the display are failed, refer to appropriate
procedures for the individual failures.
IF PILOT’S PFD FAILED
1.
DISPLAY BACKUP Button . . . . . . . . . . . . .
PRESS
(if required)
Flight and EICAS information will be displayed on the MFD. EIS
information will not be displayed on copilot’s PFD.
NOTE
The PFD CDI SYNC and BARO SYNC settings must be ON
to allow the copilot’s PFD controls to affect settings on the
MFD. These settings are accessible using the PFD MENU
button.
2.
Flight Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TRANSFER
(Press XFR button to operating PFD)
3.
FD/AUTOPILOT Modes . . . . . .
RESELECT and REENGAGE
(as required)
4.
Transponder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SWITCH
(to operating transponder)
5.
COM and NAV Radios. . . . . . . . . . . . . . . . . . . . . . . . .
SWITCH
(to operating COM and NAV radios)
6.
PFD Controls. . . . . . . . . . . . . . . . . . . . .
USE OPERATING PFD
(for required data entry (Com, Nav, Baro setting, etc.))
IF MFD FAILED
1.
DISPLAY BACKUP Button . . . . . . . . . . . . . . . . . . . . . .
PRESS
(EIS information will be displayed only on pilot’s PFD)
IF COPILOT’S PFD FAILED
No action is necessary. Normal operation on pilot’s PFD and MFD
will not be affected by loss of copilot’s PFD.
208BPHCUS-00
3-72
Summary of Contents for Cessna Grand Caravan Ex 208B
Page 2: ......
Page 351: ...CESSNA SECTION 5 MODEL 208B 867 SHP PERFORMANCE GARMIN G1000 U S Figure 5 23 208BPHCUS 00 5 63...
Page 352: ...SECTION 5 CESSNA PERFORMANCE MODEL 208B 867 SHP GARMIN G1000 U S Figure 5 24 208BPHCUS 00 5 64...
Page 353: ...CESSNA SECTION 5 MODEL 208B 867 SHP PERFORMANCE GARMIN G1000 U S Figure 5 25 208BPHCUS 00 5 65...
