Textron Cessna Grand Caravan Ex 208B, Pilot'S Operating Handbook And Faa Approved Airplane Flight Manual

Page: 575 / 846

CESSNA SECTION 7
MODEL 208B 867 SHP AIRPLANE AND SYSTEMS DESCRIPTION
GARMIN G1000
U.S.
CABIN HEATING, VENTILATING AND DEFROSTING
SYSTEM
(Continued)
AFT/FORWARD CABIN PUSH-PULL CONTROL
A push-pull control, labeled AFT CABIN-PULL, FWD CABIN-PUSH, is
located on the CABIN HEAT switch and control panel. With the control
in the AFT CABIN position (pulled out), heated air is directed to the aft
cabin heater outlets located on the cabin sidewalls at floor level on the
Passenger Version 208 and the outlets in the floor behind the pilot and
copilot on the Cargomaster.
With the control in the FWD CABIN position (pushed in), heated air is
directed to the forward cabin through four heater outlets located behind
the instrument panel and/or the two windshield defroster outlets. The
push-pull control can be positioned at any intermediate setting desired
for proper distribution of heated air to the forward and aft cabin areas.
DEFROST/FORWARD CABIN PUSH-PULL CONTROL
A push-pull control, labeled DEFROST-PULL, FWD CABIN-PUSH, is
located on the CABIN HEAT switch and control panel. With the control
in the DEFROST position (pulled out), forward cabin air is directed to
two defroster outlets located at the base of the windshield (the AFT
CABIN/FWD CABIN push-pull control also must be pushed in for
availability of forward cabin air for defrosting). With the DEFROST/
FWD CABIN push-pull control in the FWD CABIN position (pushed in),
heated air will be directed to the four heater outlets behind the
instrument panel.
208BPHCUS-00 7-111