68
8-8-12. Off timer ON/OFF (:TIMER:MOD)
This command activates or deactivates the Off Timer.
:TIMER:MOD <value>
Setting
<<value> is as shown below:
0: Deactivates the Off Timer.
1: Activates the Off Timer.
Application example :TIMER:MOD 1
Activates the Off Timer.
Query
:TIMER:MOD?
Inquires about the setting.
Response example
1
Indicates that the Off Timer is working. “?” has
the same function as <value>.
Remark
This command causes an error during sequence operation (RUN).
8-8-13. Off timer value setting (:TIMER:SET)
This command sets or inquires about the Off Timmer value.
:TIMER:SET <value>
Setting
The <value> range is between
0.1 and 99.5.
Specify the hour in
the integer part and minutes in the first decimal place (in units
of 10 minutes).
Applicatuin example :TIMER:SET 10.3
Set the Off Timer value to 10 hours and 30
minutes.
Query
:TIMER:SET?
Inquires about the setting.
Response example
15.2
Indicates that the Off Timer value is sset to 15
hours and 20 minute.
Remark
This command causes an error during sequence operation (RUN).
It also causes an error if a value between 6 and 9 is set the first decimal
place.
8-8-14. Monitor inquiry (:MEAS?)
This command inquires about the monitored data. In response, the voltage, current, power
and CV/CC/CP status are returned.
Setting None
Query
:MEAS?
Response example
200.0,5.00,100,0
Indicates that the output values are 200.0V, 5.00A and 100W and the
CV function is working.
※
The voltage, current, power and status are returned in this
order. The status is 0 (CV), 1 (CC) or 2 (CP).
Remark
None
