47
The OUTPUT key does not start sequence operation.
Use the PRESET 1 key (
) to start sequence operation. Even if the
sequence function is activated and the SEQUENCE
の
LED is lit, the sequence
operation will not start unless the PRESET 1 key (
) is pressed. Other
functions than the preset function work normally even when the SEQUENCE
LED is lit. When the OUTPUT key s pressed during sequence operation,
sequence operation finishes. Note that completion of sequence operation is
different from deactivation of output in normal operation.
Operation procedure
Display in sequence operation is
different from that in normal
operation. It is as shown below.
When the ESC/DISP key is
pressed in sequence operation,
the step number is displayed on
the voltage 7-segment LED and
the number of cycles is displayed
on the current 7-segment LED.
Press the ESC/DISP key again to
return to the set value display
condition (or the output value
display condition while output is
given).
V
W
A
Hi-
Ω
W
OFF TIMER
V
A
W
MENU ENTER
ESC
CHECK
DISP
1
2
3
PRESET
FAST/LOCK(3s)
/LOCAL
R
O
TA
TE
During sequence operation, the
SEQUENCE LED below the
PRESET key blinks, indicating
that sequence operation is being
executed. To stop sequence
operation halfway, press the
OUTPUT key or deactivate the
sequence function as shown in
Section
“5-5-4. Sequence function (04)”
