37
5-5-6. External control (ON/OFF) (06)
It is possible to turn on or off the output by shorting or opening the signal pins
with external contact signals.
Short circuit: OUTPUT ON, Open: OUTPUT OFF
◆
See Section
“5-7-4. Output ON/OFF with external contacts”
below.
Operation procedure
1. Press the MENU key until menu
number “07” is displayed.
2. Press the ENTER/CHECK key
to validate it.
3. Select ON or OFF with the
encoder.
IN : ON/OFF control with the
OUTPUT key.
OUT : ON/OFF control with
external contacts.
4. Press the ENTER/CHECK key
to validate it.
5. Press the ESC/DISP key to
return to the nomal state.
