TEXIO DCS-4605 Page 98 Instruction Manual Download

Page: 98 / 117

5-3-2. Saving the panel settings

Procedure

1. (For saving to USB flash

drive) Insert the USB flash
drive into the front panel
USB port.

2. Press the Save/Recall key

twice to access the Save
menu.

Save/Recall

3. Press

Save Setup

Save

Setup

4. Press

Destination

repeatedly to select the
saved location. Use the
Variable knob to change the
internal memory location
(S1 ~ S15).

Destination

Memory

VARIABLE

Memory

Internal memory, S1 ~ S15

USB

USB, no practical limitation for the
amount of files. When saved, the
setup file will be placed in the root
directory.

5. Press

Save

to confirm

saving. When completed, a
message appears at the
bottom of the display.

Save

Note

The file will not be saved if the
power is turned off or the USB flash
drive is removed before completion.

File utilities

To edit the USB drive contents
(create/ delete/ rename files
and folders), press

File Utilities

For details, see page 82.

File

Utilities

Summary of Contents for DCS-4605






















































































































Search results

Summary of Contents for DCS-4605

Reviews:

Related manuals for DCS-4605

Brands by name

Popular brands

TEXIO DCS-4605, Instruction Manual

Search results

Summary of Contents for DCS-4605

Reviews:

Related manuals for DCS-4605

Brands by name

Popular brands