TEXIO DCS-4605 Instruction Manual Download | Manualshive

Page: 8 / 117

background image

II

USING THE PRODUCT SAFELY

WARNING

!

CAUTION

!

■

Do not remove the product’s covers and panels

Never remove the product’s covers and panels for any purpose.
Otherw

ise, the user’s electric shock or fire may be incurred.

■

Warning on using the product

Warning items given below are to avoid danger to user’s body and life and
avoid the damage or deterioration of the product.
Use the product, observing the following warning and caution items.

■

Warning items on power supply

● Power supply voltage

The rated power supply voltages of the product are 100, 120, 220 and
240VAC. The rated power supply voltage for each product should be
confirmed by reading the label attached on the back of the product or
by the “rated” column shown in this instruction manual.
The specification of power cord attached to the products is rated to
125VAC for all products which are designed to be used in the areas
where commercial power supply voltage is not higher than 125VAC.
Accordingly, you must change the power cord if you want to use the
product at the power supply voltage higher than 125VAC. If you use
the product without changing power cord to 250VAC rated one,
electric shock or fire may be caused.
When you used the product equipped with power supply voltage
switching system, please refer to the corresponding chapter in the
instruction manuals of each product.

● Power cord

(Important) The attached power cord set can be used for this

device only.

If the attached power cord is damaged, stop using the product and call
us or your local dealer. If the power cord is used without the damage
being removed, an electric shock or fire may be caused.

● Protective fuse

If an input protective fuse is blown, the product does not operate.  For a
product with external fuse holder, the fuse may be replaced.  As for
how to replace the fuse, refer to the corresponding chapter in this
instruction manual.
If no fuse replacement procedures are indicated, the user is not
permitted to replace it.  In such case, keep the case closed and consult
us or your local dealer.  If the fuse is incorrectly replaced, a fire may
occur.

«
...
6
7
8
9
10
...
»

Summary of Contents for DCS-4605






















































































































Reviews:

No comments

Related manuals for DCS-4605

Brand: Rabe Pages: 65

Brand: BANLAW Pages: 32

Brand: Baker Instrument Company Pages: 24

Brand: NEC Pages: 44

Brand: Panasonic Pages: 30

Brand: 1010music Pages: 2

Brand: 1010music Pages: 4

Brand: Ace Pages: 17

Brand: ACE INSTRUMENTS Pages: 33

Brand: ACE INSTRUMENTS Pages: 2

Brand: ACE INSTRUMENTS Pages: 2

Brand: TapFlo Pages: 35

Brand: DANA Pages: 8

Brand: 2E Pages: 6

Brand: Danelec Pages: 67

Brand: Gaspardo Pages: 16

Brand: Gastrodomus Pages: 4

Brand: HANYOUNG NUX Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands