Premier Elite 8XP-W & 32XP-W Installation Manual
INS467-8
15
Premier Elite
SmartKey™
Introduction
Premier Elite SmartKey™
are now learnt and all functionality managed th
rough the “Setup Users” Menu.
Ricochet
and
Premier Elite Series
V2.xx firmware upgrades add additional capabilities to the management of
Premier Elite SmartKey™
. In multiple expander systems it is now possible to choose which zones (and
therefore expander) the
Premier Elite SmartKey™
will use for its routing, LED and Aux functions can also be
changed within the “Setup Users” menu.
All users on the system can have a
Premier Elite SmartKey™
a TAG and a code, or any combination of them.
This section only deals with
Premier Elite SmartKey™
learning and routing, all other user programmable
options can be found in INS176-8 or later
Premier Elite Series Installation Manual
.
Great care should be taken when using large numbers of
Premier Elite SmartKey™
, only one
Premier Elite
SmartKey™
per expander can be used by the system at any one time, and on Multiple expanders systems, or
large sites, functionality should be checked in all areas of the site where the device may be used.
Premier Elite SmartKey™
Routing
Premier E
lite SmartKey™
should only be learned to the system AFTER all devices have been learned and
placed in their final location. Whilst it is possible to learn at any point during the programming of the system,
learning and testing the functionality of the
Prem
ier Elite SmartKey™
after all devices have been placed will
ensure that the
Premier Elite SmartKey™
performs as expected, and works in locations where the user
would expect it too.
Route By
The Route By function allows you to select which Zones (and therefore expander) the
Premier Elite
SmartKey™
will use on the system for its routing. This should be selected BEFORE the device has been
learned.
In the examples below Fig 1 shows the zones associated with Expander 1, which is a 32XP-W, and Fig 2
shows Expander 2 which is also a 32XP-W, when using 8XP-W there will obviously be less devices that the
Premier Elite SmartKey™
can use.
ser00 Route By
Zones 00 - 040
Fig 1
ser00 Route By
Zones 04 - 072
Fig 2
The
/
key is used to select this menu and the
U
key used to select which expander and
associated zones will be used
Once a
Premier Elite SmartKey™
has been learned the
/
key will show which zones are being used
for routing. It is not possible to alter this once learned. To change the routing the
Premier Elite SmartKey™
should be deleted and the process started from the beginning.
Deleting a Premier Elite SmartKey™
Deleting the
Premier Elite SmartKey™
from the user is a similar process to learning, at the appropriate point
in the menu press
/
followed by
n
/
n
, then
/
the
Premier Elite SmartKey™
will be
removed from the User. To delete all user data see INS176-8 or later.