22
for example, a tree or wall. Always exercise extra precaution when backing up or moving the
machine backwards.
Do not overload the machine. Always use it with care.
Note that the handlebar may vibrate during operation; therefore it is recommended not to use
the machine for longer than
2 hours in every session.
Wheels
The wheels are fitted with a kind of differentiale; this means that the machine is easier to turn.
Note when activating the clutch handle the shaft needs to turn to grab the rim of the wheel.
Depending on the start position of the shaft, it can take up to one whole turn before it grabs
the rim. With the effect that over the first few meters, the machine will drive unevenly to left or
right.
Alternatively mount the wheel on the shaft in between the 2 pins on the rim.
See fig 19, 20.
Cleaning
The machine should be cleaned after use. Use a garden hose to wash off soil and dirt. The
chassis number should only be cleaned with a damp cloth; otherwise there is a risk that it
might be erased. Avoid using a high-pressure washer during cleaning.
Always stop the motor before cleaning.
Maintaining
The engine must be stopped when carrying out maintenance and cleaning operations, when
changing accessories and when being transported by means other than under its own power.
Always stop the engine before doing maintenance work.
Engine
The machine is delivered from the manuafacturer without oil or petrol.
Remember to fill engine oil before using the machine.
Remember that fuel is very flammable.
Replace worn or damaged mufflers as needed.
Do not replace or adjust the motor settings.
For correct use and maintenance of the engine, consult the accompanying engine manual.
