19
6. Remove the bolts and nuts which fix the control panel.
Mount the cover for control panel on the front side of the handlebar, while the control
panel are re-mounted on the backside of the handlebar.
Figure 11
7. Mount the lever from the gear control arm on the gear-shaft on the machine. Tighten, by
using a wrench.
Figure 11, 12, 13
8. Mount the upperhandle on lower handle by using the handle conncetors.
Figure 14, 15. 16
The machine is now ready for use.
Fill oil and fuel as instructed in the motor’s instruction manual.
Mounting the accessory
Step 1.
Align the accessory and the
machine.
Step 2.
Place the accessory and the
machine at an angle.
