manualshive.com logo in svg

Texas Memory Systems 320, User Manual, Page: 16 / 122

Share
Download
Texas Memory Systems 320 User Manual Download Page 16

 

 

 

2.

 

In a RamSan-320/325, the front 
panel displays “Restoring Data” 

and cycles between a progress 
bar and an estimated time until 

completion. Administrators may 
use this to determine how much 

time before the system is on-line.  
This information is also available 

through the Text Management 
Interface.  This process will take 
approximately 12 minutes for a 

fully loaded system.  
 

If all system LUNs are set to 
Volatile mode, the front panel 

displays “Initializing” instead of 
“Restoring Data.” 

 

 

 

3.

 

Once the system has restored 
data, the front panel displays 

“System Status: GOOD” and 
shows the performance bars for 

each Fibre Channel port.  The 
numbers represent the Fibre 

Channel Controllers.  If a 
controller is not installed, the 

number and corresponding 
performance will not display.  The 
top bars represent the port A and 

the bottom bars represent port B. 

 

Restoring Data ...   73.8%

 

Restoring Data ...   73.8%
Est. Time Left 

   04:03 

System Status: 

GOOD 

1==- 2=-- 3- 

4=== 

 

The system is now ready for normal operation. 

 
 

RamSan-300/320/325 

User’s Manual 

 

- 12 - 

Summary of Contents for 320



























































































































Reviews:

No comments