To remove a trap receiver from the list of Trap IPs:
•
Select “Remove IP address from the trap list”
•
Select the IP to be removed and press [ENTER]
To view a list of trap receivers by IP address:
•
Select “Print the current trap IP list”
•
The interface will display the list of trap receivers. Press
[ENTER] to return to the menu.
To save any changes:
•
Select “Save changes and exit”
Via Web Management
To add a trap receiver’s IP address via the Web Management
Interface:
•
Click on the “Management Control Processor” graphic.
•
Click on the “SNMP” tab.
•
Enter the IP address of the trap receiver.
•
Click the “Add IP” button.
To remove a trap receiver’s IP address via the Web Management
Interface:
•
Click on the “Management Control Processor” graphic.
•
Click on the “SNMP” tab.
•
Select the IP address of the trap receiver from the Trap IP list.
•
Click the “Delete” button.
8.1.3
Downloading the MIB file
The network manager makes virtual connections to the RamSan,
which returns information to the manager regarding the device’s
status. The agent contains a database, known as the SNMP
Management Information Base (MIB), describing these application
parameters. The manager uses this database to make requests to
the agent and interpret the signals received. The MIB describes a
set of statistical and control values defined for hardware nodes on
the RamSan.
Via Web Management
To download the RamSan’s MIB file via the Web Management
Interface:
Click on the “Management Control Processor” graphic.
Click on the “SNMP” tab.
Click the “Get MIB file” button.
RamSan-300/320/325
User’s Manual
- 97 -
Summary of Contents for 320
Page 1: ...TEXAS MEMORY SYSTEMS INC RamSan 300 320 325 User s Manual Version 2 1 ...
Page 12: ...Figure 2 1 RamSan 320 325 Layout RamSan 300 320 325 User s Manual 8 ...
Page 110: ...Figure B 3 Power Supply Module Figure A 5 Memory Blade RamSan 300 320 325 User s Manual 106 ...
Page 111: ...Figure A 6 120 Gigabyte Replacement Hard Drive RamSan 300 320 325 User s Manual 107 ...
