Texas Instruments TSW12QJ1600, User Manual

Page: 2 / 26

2 SLAU796 – July 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Contents
Contents
Preface
........................................................................................................................................
4
1 Introduction
.........................................................................................................................
5
2 Equipment
...........................................................................................................................
7
2.1 Evaluation Board Feature Identification Summary
......................................................................
7
2.2 Required Equipment
.........................................................................................................
8
3 Setup Procedure
..................................................................................................................
9
3.1 Install the High Speed Data Converter (HSDC) Pro Software
.........................................................
9
3.2 Install the Configuration GUI Software
....................................................................................
9
3.3 Connect the EVM and TSW14J58EVM
.................................................................................
10
3.4 Connect the Power Supplies to the Boards (Power Off)
..............................................................
10
3.5 Connect the Signal Generators to the EVM (RF Outputs Disabled Until Directed)
...............................
10
3.6 Turn On the TSW14J58EVM Power and Connect to the PC
........................................................
10
3.7 Turn On the TSW12QJ1600EVM Power Supplies and Connect to the PC
........................................
10
3.8 Turn On the Signal Generator RF Outputs
.............................................................................
10
3.9 Open the TSW12QJ1600EVM GUI and Program the ADC and Clocks
............................................
11
3.10 Calibrate the ADC Device on the EVM
..................................................................................
12
3.11 Open the HSDCpro Software and Load the FPGA Image to the TSW14J58EVM
................................
13
3.12 Capture Data Using the HSDC Pro Software
..........................................................................
13
4 Device Configuration
..........................................................................................................
15
4.1 Supported JESD204C Device Features
.................................................................................
15
4.2 Tab Organization
...........................................................................................................
15
4.3 Low-Level Control
..........................................................................................................
16
5 Troubleshooting the TSW12QJ1600EVM
...............................................................................
17
A References
........................................................................................................................
18
A.1 Technical Reference Documents
.........................................................................................
18
A.2 TSW14J58EVM Operation
................................................................................................
18
B HSDC Pro Settings for Optional ADC Device Configuration
.....................................................
19
B.1 Changing the Number of Frames per Multi-Frame (K)
................................................................
19
B.2 Customizing the EVM for Optional Clocking Support
.................................................................
19
B.2.1 Onboard 50M Ref to ADC PLL (Default)
.......................................................................
19
B.2.2 "Ext Ref to ADC PLL"
............................................................................................
20