Texas Instruments TMS320C55 Series Reference Manual Download Page 589

Page: 589 / 599

Index-3

Index

String

1-4

DBIER0 register, conventions for

B-3

DBIER1 register, conventions for

default values

dependencies

number of, determining

configuration properties

2-61

function callability

A-3

functions in, list of

DEV_createDevice function

2-64

DEV_deleteDevice function

device

readiness of, checking

2-77

retrieving buffer from

device-dependent control operations, performing

configuration properties for

DP register, conventions for

D-port write operation

2-111

drivers (see device drivers)
DSP speed

2-109

DSP/BIOS clock (see timer)
DSP/BIOS functions, list of

1-5

DSP/BIOS modules, list of

DTR_multiply function

2-105

DTR_multiplyInt16 function

environment for HOOK and TSK objects

2-141

environment pointer for HOOK and TSK objects

error condition

error handling

error message, writing to system log

2-188

error number for tasks

2-494

events

power, function to be called on

2-326, 2 -329

scheduling functions based on

2-291

tracing

2-467

unregistering notification function for

2-335

exit function

2-453, 2 -511

Summary of Contents for TMS320C55 Series
























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TMS320C55 Series

Reviews:

Related manuals for TMS320C55 Series

Brands by name

Popular brands

Texas Instruments TMS320C55 Series, Reference Manual

Search results

Summary of Contents for TMS320C55 Series

Reviews:

Related manuals for TMS320C55 Series

Brands by name

Popular brands