Texas Instruments TMS320C54x User Manual Download Page 450

Page: 450 / 469

Glossary

E-5

Glossary

macro:

A user-defined routine that can be used as an instruction.

macro call:

The process of invoking a macro.

macro definition:

A block of source statements that define the name and

the code that make up a macro.

macro expansion:

The source statements that are substituted for the

macro call and are subsequently assembled.

macro library:

An archive library composed of macros. Each file in the

library must contain one macro; its name must be the same as the macro
name it defines, and it must have an extension of .asm.

magic number:

A COFF file header entry that identifies an object file as a

module that can be executed by the TMS320C54x.

map file:

An output file, created by the linker, that shows the memory

configuration, section composition, and section allocation, as well as
symbols and the addresses at which they were defined.

member:

The elements or variables of a structure, union, archive, or enu-

meration.

memory map:

A map of target system memory space, which is partitioned

into functional blocks.

mnemonic:

An instruction name that the assembler translates into machine

code.

model statement:

Instructions or assembler directives in a macro definition

that are assembled each time a macro is invoked.

named section:

An initialized section that is defined with a .sect directive.

object file:

A file that has been assembled or linked and contains machine-

language object code.

object format converter:

A program that converts COFF object files into

Intel format or Tektronix format object files.

Summary of Contents for TMS320C54x






















































































































































































































































































































































































































































































Search results

Summary of Contents for TMS320C54x

Reviews:

Related manuals for TMS320C54x

Brands by name

Popular brands

Texas Instruments TMS320C54x, User Manual

Search results

Summary of Contents for TMS320C54x

Reviews:

Related manuals for TMS320C54x

Brands by name

Popular brands