Texas Instruments TMS320C54x User Manual Download Page 437

Page: 437 / 469

Error Messages

D-22

illegal operator in expression

Description

Review legal expression operators.

illegal option within SECTIONS

Description

The –l (lowercase L) option is the only option allowed within a
SECTIONS directive.

illegal relocation type (...) found in section(s) of file (...)

Description

The binary file is corrupt.

internal error (...)

Description

This linker has an internal error.

invalid archive size for file (...)

Description

The archive file is corrupt.

invalid path specified with –i flag

Description

The operand of the –i option (flag) is not a valid file or path-
name.

invalid value for –f flag

Description

The value for –f option (flag) is not a 2-byte constant.

invalid value for –heap flag

Description

The value for –heap option (flag) is not a 2-byte constant.

invalid value for –stack flag

Description

The value for –stack option (flag) is not a 2-byte constant.

invalid value for –v flag

Description

The value for –v option (flag) is not a constant.

I/O error on output file (...)

Description

The disk may be full or protected.

Action

Check disk volume and protection.

Summary of Contents for TMS320C54x






















































































































































































































































































































































































































































































Search results

Summary of Contents for TMS320C54x

Reviews:

Related manuals for TMS320C54x

Brands by name

Popular brands

Texas Instruments TMS320C54x, User Manual

Search results

Summary of Contents for TMS320C54x

Reviews:

Related manuals for TMS320C54x

Brands by name

Popular brands