Texas Instruments TMS320C54x User Manual Download Page 434

Page: 434 / 469

Error Messages

D-19

Error Messages

can’t create map file (...)

Description

Usually indicates an illegal filename.

Action

Check spelling, pathname, environment variables, etc. The
filename must conform to operating system conventions.

can’t find input file

filename

Description

The file,

filename, is not in your PATH, is misspelled, etc.

Action

Check spelling, pathname, environment variables, etc. The
filename must conform to operating system conventions.

can’t open (...)

Description

The specified file does not exist.

Action

Check spelling, pathname, environment variables, etc. The
filename must conform to operating system conventions.

can’t open

filename

Description

The specified file does not exist.

Action

Check spelling, pathname, environment variables, etc. The
filename must conform to operating system conventions.

can’t read (...)

Description

The file may be corrupt.

Action

If the input file is corrupt, try reassembling it.

can’t seek (...)

Description

The file may be corrupt.

Action

If the input file is corrupt, try reassembling it.

can’t write (...)

Description

Disk may be full or protected.

Action

Check disk volume and protection.

command file nesting exceeded with file (...)

Description

Command file nesting is allowed up to 16 levels.

Summary of Contents for TMS320C54x






















































































































































































































































































































































































































































































Search results

Summary of Contents for TMS320C54x

Reviews:

Related manuals for TMS320C54x

Brands by name

Popular brands

Texas Instruments TMS320C54x, User Manual

Search results

Summary of Contents for TMS320C54x

Reviews:

Related manuals for TMS320C54x

Brands by name

Popular brands