![background image](http://html1.mh-extra.com/html/texas-instruments/tida-00293/tida-00293_user-manual_1094143034.webp)
Chapter 4
DLPU025 – September 2014
Building the DLP
®
3D Printer Reference Design from
Source
4.1
The DLP 3D Printer Reference Design application's source code is made available in the design files
installed in
Chapter 2
. The availability of the source allows users to modify, and build, the scanning
application on their own. Complete the installation of the necessary files before attempting to build the
application from source.
4.2
Qt Creator Installation
This section guides the user through the installation of the Qt Creator integrated development environment
(IDE.)
1. Download the Qt Creator IDE from the project webpage located
here.
Download the 32-bit Windows
version of Qt 5.2.1, or higher, that is bundled with MinGW.
Note:
This SDK uses C++11 and will not
compile using an out-of-date compiler. Use Qt 5.2.1, or later!
2. Execute the downloaded install file.
3. Click the Next button as shown in
Figure 4-1
.
Figure 4-1. Qt Creator IDE Installation
34
Building the DLP
®
3D Printer Reference Design from Source
DLPU025 – September 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated