![background image](http://html1.mh-extra.com/html/texas-instruments/tida-00293/tida-00293_user-manual_1094143032.webp)
Printing An Object
www.ti.com
Figure 3-21. Starting The Print Sequence
6. The print sequence will take up to 10 minutes to prepare, and upload to, the projector. Do not
disconnect the PC from the DLP 3D Printer
or
close the GUI during this process. Either could corrupt
the firmware on the LightCrafter 4500. Wait for the message "You may now disconnect the PC from
the DLP 3D Printer" to be displayed, as shown in
Figure 3-22
.
32
Using the DLP
®
3D Printer Reference Design
DLPU025 – September 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated