www.ti.com
Preparing The Hardware For Printing
Figure 3-8. Resin Vat Placement
3. Secure the vat in place by securing the latches on the base, as shown in
Figure 3-9
.
Figure 3-9. Resin Vat Locked In Position
4. Connect the TTL-232R-3V3 cable to the RS232 to MSTP Cape Cable Assembly (TI Drawing #
2514179), as shown in
Figure 3-10
. The black wire from the TTL cable aligns with the single wire pin
23
DLPU025 – September 2014
Using the DLP
®
3D Printer Reference Design
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated