![background image](http://html1.mh-extra.com/html/texas-instruments/tida-00293/tida-00293_user-manual_1094143051.webp)
www.ti.com
OpenCV Build and Installation
20. Navigate to the OpenCV build path that was given to Cmake in step 13. From this path, run the
command "mingw32-make" as shown in
Figure 4-30
.
Note:
If the command "mingw32-make" is not
recognized, try using the command "make." This is dependent on the naming of the make.exe file
installed with Qt Creator.
Figure 4-30. Starting the OpenCV Build Process
21. Depending on your system specifications, this process could take from 1 hour to 6 hours. Allow the
build to complete normally, as shown in
Figure 4-31
.
Figure 4-31. Long OpenCV Build Process
22. After the mingw32-make command has finished running, the built libraries must be installed. Run the
command "mingw32-make install" as shown in
Figure 4-32
.
Figure 4-32. Installing the OpenCV Libraries
51
DLPU025 – September 2014
Building the DLP
®
3D Printer Reference Design from Source
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated