Texas Instruments TI-Nspire CX Getting Started Download Page 69

Page: 69 / 118

Configuring Handhelds

Configuring Handhelds

This chapter provides information needed to:

•

Maintain batteries used in the handheld.

•

Change the default settings.

•

Attach a wireless module when the handheld is used in the classroom.

Checking Battery Status

To check the status of the TI-Nspire™ Rechargeable Battery in a
handheld:

1. Press

The

Home

screen opens.

2. Press

5 4

(

Settings > Status

The

Handheld Status

dialog box opens.

3. Click

or press

to close the window.

Note:

From an open document, press

~ 7 4

(

Settings &

Status > Status

Recharging the Handheld

To recharge the TI-Nspire™ Rechargeable Battery in a handheld, connect
it to any of the following power sources:

•

A standard USB cable connected to a computer

•

A TI USB wall charger (sold separately)

Battery status is
shown here.

Summary of Contents for TI-Nspire CX























































































































Search results

Summary of Contents for TI-Nspire CX

Reviews:

Related manuals for TI-Nspire CX

Brands by name

Popular brands

Texas Instruments TI-Nspire CX, Getting Started

Search results

Summary of Contents for TI-Nspire CX

Reviews:

Related manuals for TI-Nspire CX

Brands by name

Popular brands