Preparing TI-Innovator™ Rover
Follow these steps to fully charge your TI-Innovator™ Rover.
1. Identify the Micro connector on the USB
Standard A to Micro cable.
2. Insert the Micro connector into the
PWR
port on the side of the Rover.
3. Insert the free end of the cable (the "
A
"
connector) into the USB port on your
computer or TI Wall Charger.
Note:
The Battery Level Indicator shows
solid green when the battery is fully
charged.
Make sure the TI-Innovator™ Rover is switched
OFF
before connecting to the
TI-Innovator™ Hub.
▶
Flip the
On/Off (I/O)
switch to the
Off (O)
position.
4