5
Connecting TI-Innovator™ Rover
There are two sets of connection steps to use the TI-Innovator™ Rover.
•
First, connect the Rover to the TI-Innovator™ Hub, using the two ribbon cables
provided.
•
Second, connect the Hub to a graphing calculator, using the USB Unit-to-Unit
(Mini-A to Mini-B) cable included with the Hub.
Connecting TI-Innovator™ Rover to TI-Innovator™ Hub
1. Insert the
Breadboard Ribbon Cable
into the
Breadboard Connector
on the Hub.
Note:
It is critical that you insert the cable correctly. Make sure the red (dark) wire
pin is inserted into the 5v hole on the Hub's
Breadboard Connector
.
2. Carefully guide the attached Ribbon Cable through the opening at the back of the
Rover.
3. As the cable comes through, slide the Hub into place using the
Guide Rails
.
You will hear a click when the Hub is properly inserted.