Connecting TI-Innovator™ Hub to a Graphing Calculator
1. Turn the Rover right side up.
2. Lift and turn the
Calculator Holder Pegs
so that they are parallel with the side of
the Rover.
3. Place the TI CE Graphing Calculator or TI-Nspire™ CX Handheld on the platform
with the screen toward the
Marker Holder
.
4. Turn the pegs so that the CE or CX Label is positioned inward to match the graphing
calculator.
The pegs will snap into place when they are positioned correctly.
Caution:
Do not turn the
Calculator Holder Pegs
without lifting them first. They
could break.
5. Identify the "
B
" connector on the
USB Unit-to-Unit (Mini-A to Mini-B) cable
. Each end
of this cable is embossed with a letter.
6. Insert the "
B
" connector into the
DATA
port on the Hub.
7. Insert the free end of the cable (the "
A
" connector) into the USB port on the
graphing calculator.
8