Texas Instruments LMK5B33216EVM User Manual Download

Page: 47 / 53

6.10 Design Report Page

The Design Report Page shows an overview of the current profile settings.

Figure 6-24. Design Report Page

7 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from Revision * (February 2022) to Revision A (July 2022)

Page

• Added a DCDC supply option to the EVM image, schematic images, BOM table, and

Power Supply

section..

• Added

Additional XO Input Options

section......................................................................................................

• Changed TICS Pro GUI images to the latest LMK5B33216 TICS Pro profile..................................................

• Changed APLL DCO page description.............................................................................................................

• Changed SYNC/SYSREF/1-PPS page description..........................................................................................

• Changed EEPROM page description...............................................................................................................

• Changed Design Report page description........................................................................................................

www.ti.com

Appendix A - TICS Pro LMK5B33216 Software

SNAU263A – FEBRUARY 2022 – REVISED JULY 2022

Submit Document Feedback

LMK5B33216EVM User's Guide

Summary of Contents for LMK5B33216EVM






















































Search results

Summary of Contents for LMK5B33216EVM

Reviews:

Related manuals for LMK5B33216EVM

Brands by name

Popular brands

Texas Instruments LMK5B33216EVM, User Manual

Search results

Summary of Contents for LMK5B33216EVM

Reviews:

Related manuals for LMK5B33216EVM

Brands by name

Popular brands