6.1.5 Step 5
Enter desired target frequencies for each of the outputs as well as desired output format, output source, whether
the output is SYSREF, and whether the output is being used or not.
Press
Calculate VCO Frequency Options
to generate a list of possible VCO frequency combinations.
Figure 6-5. Step 5: Clock Outputs
Select a desired combination of VCO frequencies from the list of calculated values. If a specific VCO frequency
is not in this list, a manual override can occur by selecting the
Enable User Override
checkbox and typing in
the desired VCO frequencies. The
Copy to Selected VCO Frequency
box can also be used to copy the VCO
frequency in the list selections to the VCO overrides.
Press the
Assign Selected VCO Settings to Device
button to update the VCO frequencies, then press the
Apply
Output Clock Settings to Device
button. By default, the analog PLL frequencies are shown. The DPLL calculated
frequency from step 6, however, will result in exact output frequencies.
Appendix A - TICS Pro LMK5B33216 Software
34
LMK5B33216EVM User's Guide
SNAU263A – FEBRUARY 2022 – REVISED JULY 2022
Copyright © 2022 Texas Instruments Incorporated