Texas Instruments DLP3030-Q1, User Manual

Page: 10 / 20

Kit Assembly
www.ti.com
10 DLPU065 – November 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Getting Started
• Install the LED Power Cable into the Formatter Board using the cable connector with the red, green
and blue wires.
• Install the LED Thermistor Cable, part of the LED Power Cable, into the Formatter Board using the
cable connector with the three brown wires.
• Install the Photodiode Cable to the Formatter Board.
CAUTION
Please ensure that the LED Power and LED Thermistor cables are installed
into the proper connector, as shown in
Figure 2-2 . Improper installation may
cause damage to the LEDs.
Figure 2-2. Installation of PGU Cables into Formatter Board