Texas Instruments DLP LightCrafter 6500, User Manual, Page: 57 / 60

CAUTION
The kit contains ESD-sensitive components.
Handle with care to prevent permanent damage.
CAUTION
To minimize the risk of fire or equipment damage, make
sure that air is allowed to circulate freely around the DLP
LightCrafter 6500 and 9000 board when operating.
57 DLPU028C – October 2014 – Revised November 2016
Submit Documentation Feedback
Copyright © 2014–2016, Texas Instruments Incorporated
Safety
Chapter 6
DLPU028C – October 2014 – Revised November 2016
Safety
Revision C History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from B Revision (June 2015) to C Revision .................................................................................................... Page
• Added bullets "Automated optical inspection" and "Solder paste inspection"
.....................................................
8
• Added section "DLP LightCrafter 6500 and DLP LightCrafter 9000 EVM Flex Cable"
.........................................
21
• Clarified J7(LCr 6500) and J8 (LCr 9000) connection
.............................................................................
22
• Changed figure "DLP LightCrafter 6500/9000 GUI"
.................................................................................
26
• Added "for display applications, and is not recommended for applications which require pixel accuracy"
..................
27
• Changed "Pattern Mode" to "Pre-stored Pattern Mode"
............................................................................
27
• Changed "Controller/DMD Incompatible" and description.
.........................................................................
27
• Added description of Minimum LED Pulse Width control
...........................................................................
40
• Changed figure "Patten Settings Panel"
..............................................................................................
40
• Added reference to GUI enable SSCG support
.....................................................................................
46
• Changed some items in lists in section "Adding Images"
..........................................................................
48
Revision B History
Changes from A Revision (October 2014) to B Revision ............................................................................................... Page
• Replaced DLP LightCrafter6500 and 9000 images with correct assembly orientation
...........................................
6
• Added clarification: DLP LightCrafter9000 contains 2 sets of parallel flash
.....................................................
12
• Clarified silk screen I2C note about mislabeled connectors
.......................................................................
14
• Corrected Trigger Input descriptions
..................................................................................................
16
• Corrected Trigger Output descriptions
................................................................................................
16