manualshive.com logo in svg

Texas Instruments Cabri Geometry II, Manual Book

Share
Download
Texas Instruments Cabri Geometry II Manual Book Download Page 97

Chapter 10: Using the Check Property Toolbox         10-5

Copying permitted provided TI copyright notice is included
© 1997, 1999 Texas Instruments Incorporated

Equidistant

The

 

Equidistant

 

tool evaluates any 

three

 points to determine whether or not the first point is

equidistant from the two remaining points. (If a point is equidistant from the endpoints of a
segment, then the point lies on the perpendicular bisector of the segment.) The results are
reported in text.

Checking equidistant property

1.

Select 

Equidistant 

from the 

Check Property

 toolbox.

2.

Select any three points. (The first point selected is
checked relative to the two remaining points.)

A marquee box appears after the last selection.

3.

Move the pointer to move this box anywhere in the
drawing window, and click to display the result.

The text states whether or not the first point selected
is equidistant from the second and third points.

If you change the objects so that the property changes,
the displayed text changes accordingly.

Select, in order, points A, B, and C.

Click to place marquee box.

The result changes with the construction.

Points are not equidistant

Points are equidistant

Summary of Contents for Cabri Geometry II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands