manualshive.com logo in svg

Texas Instruments Cabri Geometry II, Manual Book

Share
Download
Texas Instruments Cabri Geometry II Manual Book Download Page 118

Chapter 12: Using the Display Toolbox         12-7

Copying permitted provided TI copyright notice is included
© 1997, 1999 Texas Instruments Incorporated

Mark Angle

The

 

Mark

 

Angle

 

tool labels an angle specified by three points with an angle mark.

Creating a marked angle

1.

Select 

Mark Angle

 from the 

Display

 toolbox.

2.

Specify the angle by selecting three points. The second
point must be the vertex.

Note: 

To measure an angle, just select the marked

angle with the 

Angle

 tool in the 

Measure

 toolbox.

Select three points.

Drag the mark through the vertex to

measure the reflex angle.

Modifying an angle mark

Using the 

Pointer

 tool, modify an angle mark by dragging it

through the vertex to measure the opposite angle. The
angle mark changes to 

 when the angle is 90 degrees.

Using the 

Modify Appearance

 tool in the 

Draw

 toolbox, change

the number of angle marks displayed by selecting the
desired angle mark attribute, and then the angle mark.

Example

Mark two angles:

Summary of Contents for Cabri Geometry II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands