![background image](http://html.mh-extra.com/html/texas-instruments/cabri-geometry-ii/cabri-geometry-ii_manual-book_1097124066.webp)
Chapter 7: Using the Construct Toolbox 7-1
Copying permitted provided TI copyright notice is included
© 1997, 1999 Texas Instruments Incorporated
Chapter 7: Using the Construct Toolbox
The
Construct
toolbox contains the tools associated with construction features in Cabri Geometry
II. These features allow you to construct objects in relation to other objects.
The illustration below shows the location of the
Construct
toolbox on the Cabri Geometry II
toolbar, along with its pull-down menu. Procedures for using
Construct
tools, including examples,
are presented in this chapter in the order in which the tools appear on the pull-down menu.
Perpendicular Line
Parallel Line
Midpoint
Perpendicular Bisector
Angle Bisector
Vector Sum
Compass
Measurement Transfer
Locus
Redefine Point
Construct toolbox