Texas Instruments bq78350-R1, Technical Reference

Page: 112 / 160

0x00 ManufacturerAccess() and 0x44 ManufacturerBlockAccess()
www.ti.com
112 SLUUBD3D – September 2015 – Revised September 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
SBS Commands
SLPAD (Bit 26) : ADC Measurement in SLEEP mode
1 = Active
0 = Inactive
RSVD (Bit 25) : Reserved. Do not use.
INIT (Bit 24) : Initialization after full reset
1 = Active
0 = Inactive
SLEEPM (Bit 23) : SLEEP mode
1 = Active
0 = Inactive
XL (Bit 22) : 400-kHz SMBus mode
1 = Active
0 = Inactive
CAL_OFFSET (Bit 21) : Calibration Output (raw CC offset data).
1 = Active when MAC OutputShortedCCADCCal() is sent and the raw shorted CC data for
calibration is available.
0 = When the raw shorted CC data for calibration is not available.
CAL (Bit 20) : Calibration Output (raw ADC and CC)
1 = Active
0 = Inactive
RSVD (Bit 19) : Reserved. Do not use.
AUTH (Bit 18) : Authentication in progress
1 = Active
0 = Inactive
LED (Bit 17) : LED Display
1 = LED display is on.
0 = LED display is off.
SDM (Bit 16) : SHUTDOWN triggered via command
1 = Active
0 = Inactive
SLEEP (Bit 15) : SLEEP mode conditions met
1 = Active
0 = Inactive
XCHG (Bit 14) : Charging disabled
1 = Active
0 = Inactive
XDSG (Bit 13) : Discharging disabled
1 = Active
0 = Inactive
PF (Bit 12) : PERMANENT FAILURE mode status
1 = Active
0 = Inactive
SS (Bit 11) : SAFETY mode status
1 = Active